Coating Resin_Changzhou Rule Composite Material Co., Ltd,

Coating Resin

Unsaturated polyester resins for paint are suitable for primer surface top coat of piano furniture handicraft box etc. They provide surface smoothness high hardness excellent chemical resistance and cold-heat cycle resistance....

Product category：Unsaturated Polyester Resin
Explain：
More details please refer to the products introductions
A：RC-H-1086 Unsaturated Polyester Resin
B：RC CS-810P Unsaturated Polyester Resin
C：RCS-H-1090（N）Unsaturated Polyester Resin
D：RCS-H-1161 Unsaturated Polyester Resin
E：RCS-H-8520T Self leveling Unsaturated Polyester Resin Top Finish
F：RC-TM-196（N）Piano Unsaturated Polyester Resin

Product Examples

A: RC-H-1086 Unsaturated Polyester Resin

1. Features and usage:
RC-H-1086 is an unsaturated polyester resin primer for woodware. It has good process performance and is suitable for primer coating of high-end furniture to increase the fullness of the paint film and give the paint film a three-dimensional effect.
1. The paint film has high transparency, and the varnish can fully show the wood grain of the substrate;
2. Excellent thixotropy, anti-sagging during surface coating;
3. The paint film has a fast drying speed, which can be polished in 4-6 hours at room temperature, with good sandability, high hardness and excellent adhesion;
It has good compatibility with top coat RC TM-196 series and RC-810S series, and it can also use the "wet-on-wet" process.

2. Technical index of liquid resin (25 ℃):

Item	Unit	Index	Testing method
Appearance	---	Milky white translucent liquid	B-80101
Viscosity	Pa·s	0.30~0.50	JIS K 6901.5.6
Thixotropic Index	min	2.5~3.5	JIS K 6901.5.6
Gel Time（min）	---	10.0~18.0	C-82202

Note: Gel time test: resin 50g; accelerator RC 2%; curing agent Butanox M-50 2%

3. Instrustions
Parts by weight
RC-H-1086 resin 100 units
Curing agent (Methyl ethyl ketone peroxide MEKPO 1~2 (the amount depends on the temperature and humidity)
Or cyclohexanone peroxide L liquid) 2~4 (the amount depends on the temperature and humidity)
Accelerator RCA 1~5 (Dosage depends on temperature and humidity)

4. Notes
1. Please mix well in the packaging barrel before using, or pour out all the resin in the packaging barrel and stir well before using.
2. The user should select the corresponding type of resin according to the specific environmental conditions and construction process requirements.
3. The transportation shall comply with the regulations on transportation and handling of hazardous chemicals in Chapter 5 of the "Regulations on the Safety Management of Hazardous Chemicals" of the State Council. The product should be stored in a cool place below 25℃, avoid fire, and keep away from heat and radiation sources. The shelf life of storage below 25℃ is 3 months after leaving the factory.

5. Product Safety Data (SDS):
Before using this product, please read the SDS of this product in detail.

B: RC CS-810P Unsaturated Polyester Resin

1. Features and usage:
RC CS-810P is a curtain coating resin specially applied to wood coatings such as pianos, and the resulting coating has a mirror gloss.
1. The paint film has excellent transparency and can fully show the wood grain.
2. It provides smooth, hard surface.
3. Short hardening time, improve work efficiency.

2. Technical index of liquid resin (25 ℃):

Item	Unit	Index	Testing method
Viscosity(Gardner)	---	S~U	JIS K 6901.5.5.2
Gel Time	min	7.0~13.0	JIS K 6901.5.9

Note: gel time test: resin. 50g； Accelerator RC 0%, curing agent butanox m-50 2%

3. Instructions
Parts by weight
RC CS-810P resin 100 units
Curing agent (methyl ethyl ketone peroxide MEKPO 1~2 (the amount depends on the temperature and humidity) or cyclohexanone peroxide) 2~4 (the amount depends on the temperature and humidity)
Accelerator RCA 1~5 (Dosage depends on temperature and humidity)

4. Notes
1. When the construction environment temperature is high and the gel time is short, the amount of curing agent should not be reduced,gel retarder RC-406 should be added as needed.
2. The product should be stored in a cool place below 25℃, avoid fire, and isolate the heat source. The shelf life of storage below 25℃ is 3 months after leaving the factory.

5. Product Safety Data (SDS):
Before using this product, please read the SDS of this product in detail.

C: RCS-H-1090（N）Unsaturated Polyester Resin

1. Features and usage:
RCS-H-1090(N) is a resin suitable for electrostatic spraying. It is used for the surface coating of pianos and other woodware. When used as a varnish, it does not affect the transparency and has excellent anti-sagging properties. The formed coating has Mirror luster, excellent resistance to cold and heat. Among them, RCS-H-1090N does not contain wax. When using it, you need to add wax liquid RS-106.
1. The paint film has excellent transparency and can fully show the wood grain.
2. Excellent thixotropy, anti-sagging during surface coating.
3. It makes a smooth, hard surface.
4. Short hardening time, improve work efficiency.

2. Technical index of liquid resin (25 ℃):

Item	Unit	Index		Testing method
Viscosity	Pa·s	0.30~0.50		JIS K 6901.5.6
Thixotropic index	---	2.7~3.7		JIS K 6901.5.6
Gel Time	min	Oct to next Mar	8.0~14.0	JIS K 6901.5.10
		Apr to Sep	12.0~18.0

Note: Gel time test: resin 50g; accelerator RC 2.0%, curing agent Butanox M-50 2.0%

3. Instructions:
Parts by weight
RCS-H-1090(N) resin 100 units
Curing agent (methyl ethyl ketone peroxide MEKPO 1~2 (the amount depends on the temperature and humidity) or cyclohexanone peroxide) 2~4 (the amount depends on the temperature and humidity)
Accelerator RCA 1~5 (Dosage depends on temperature and humidity)

4. Notes:
1) Please mix well in the packaging barrel before using, or pour out all the resin in the packaging barrel and stir well before using.
2) When the construction environment temperature is high and the gel time is short, the amount of curing agent cannot be reduced, and gel retarder RC-406 should be added as needed.
3) When the ambient temperature is lower than 15℃, RCS-H-1090 resin needs to be baked at 30~40℃ for more than 10 hours before it can be used.
4) When RCS-H-1090 is used above 30℃, add RC-106 liquid wax 1.0~1.5%; when RCS-H-1090N is used, add wax liquid RC-106
2.0-4.0%.
5) The transportation shall comply with the transportation and handling regulations of dangerous chemicals in Chapter 5 of the "Regulations on the Safety Management of Chemical Dangerous Goods" of the State Council. The product should be stored in a cool place below 25℃, avoid fire, and isolate the heat source. The shelf life of storage below 25℃ is 3 months after leaving the factory.

5. Product Safety Data (SDS):
Before using this product, please read the SDS of this product in detail.

D: RCS-H-1161 Unsaturated Polyester Resin

1. Features and usage:
RCS-H-1161 is a thixotropic unsaturated polyester resin topcoat for spraying. The product has good air-drying properties and construction process. It is suitable for the coating of pianos and high-end furniture with various special pigment pastes. The coating is transparent. Excellent sex.
1. Good thixotropy, anti-sagging during surface coating;
2. Moderate viscosity, excellent construction operability, and good defoaming effect;
3. It can form a smooth, hard surface, good mirror effect, anti-cracking, excellent cold and heat resistance;
4. The paint film is easy to repair, and there is no color difference;
5. Excellent transparency, suitable for occasions with higher requirements for coating transparency.
6. Easy to sand and polish

2. Technical index of liquid resin (25 ℃):

Item	Unit	Index	Testing Method
Viscosity	Pa·s	0.30~0.50	JIS K 6901.5.6
Thixotropic Index	---	2.7~3.7	JIS K 6901.5.6
Gel Time	min	19.0-29min
Non Volatile Material	---	(53.0~59.0)％	B-22301

Note: gel time test: resin 50g; Accelerator RC 2.0%, curing agent butanox m-50 2%

3. Instructions:
RCS-H-1161 100 units
Curing agent (methyl ethyl ketone peroxide MEKPO 1.5~3.0 (the amount depends on the temperature and humidity) or cyclohexanone peroxide) 2.5~5.0 (the amount depends on the temperature and humidity)
Accelerator RCA 1~5 (Dosage depends on temperature and humidity)

4. Notes
1) Please mix well in the packaging barrel before using, or pour out all the resin in the packaging barrel and stir well before using.
2) The user should select the corresponding type of resin according to the specific environmental conditions and construction process requirements.
3) The transportation shall comply with the regulations on transportation and handling of hazardous chemicals in Chapter 5 of the "Regulations on the Safety Management of Hazardous Chemicals" of the State Council. The product should be stored in a cool place below 25℃, avoid fire, and keep away from heat and radiation sources. The shelf life of storage below 25℃ is 3 months after leaving the factory.

5. Product Safety Data (SDS):
Before using this product, please read the SDS of this product in detail.

E: RCS-H-8520T Self leveling Unsaturated Polyester Resin Top Finish

1. Features and usage:
RCS-H-8520T is a self-leveling unsaturated polyester resin topcoat for wood coating. It has good air-drying and transparency and is suitable for spraying. Used in conjunction with a special color paste, it can make a variety of colors, without sanding, and light polishing can get a coating film with high hardness and good brightness.

2. Technical index of liquid resin (25 ℃):

Item	Unit	Index	Testing Method
Appearance	---	Transparent liquid	B80101
Viscosity	Pa·s	0.30~0.50	JIS K 6901.5.6
Thixotropic Index		2.70～3.70	JIS K 6901.5.6
Gel Time	min	20.0~30.0	JIS K 6901.5.10

Note: gel time test: resin 50g; Accelerator RC 2.0% ； Curing agent butanox m-50 2.0%

3. Properties of transparent resin film:

Item	Unit	Factual Value
Touch time	min	60
Grindable time	h	24
Leveling property	---	◎
fullness	---	◎
Surface gloss	---	◎
Pencil hardness	---	3H

Note: ◎ excellent
paint film should be placed at 35℃--40℃ for 24h

4. Instructions for use
Resin 100 units
Thinner styrene 15-30
Accelerator 6%Co 0.5-1.0%
Curing agent M-50 2.0-3.0%

5. Notices:
The product should be stored in a cool place below 25℃, avoid fire, and keep away from heat and radiation sources. The shelf life of storage below 25℃ is 3 months after leaving the factory.

6. Product Safety Data (SDS):
Before using this product, please read the SDS of this product in detail.

F: RC-TM-196（N）Piano Unsaturated Polyester Resin

1. Features and usage:
RC-TM-196(N) piano resin is widely used in the surface coating of pianos and high-end furniture (commonly known as polyester furniture). Because the resin is a solvent-free coating and has a high solid content, a thicker coating can be obtained by one brushing, and a bright and plump paint film can be obtained by brushing for 2 to 3 times. In addition, the paint film formed by the resin has high hardness, good abrasion resistance, high heat resistance, cold resistance, and good water resistance, solvent resistance and chemical resistance.

2. Technical index of liquid resin (25 ℃):

Item	Unit	Index	Testing Method
Appearance	---	Light yellow transparent liquid	GB/T 8237-2005
Viscosity	Pa·s	0.70~1.10	GB/T 7193.4.1-2008
Gel Time	min	10.0~18.0	GB/T 7193.4.6-2008
Acid Value	mgKOH/g	17.0~25.0	GB/T 2895
Non Volatile Material	---	(64.0~70.0)%	GB/T 7193.4.3-2008

3. Physical properties of casting body (for reference only):

Item	Unit	Value	Testing Method
Heat Deflection Temperature	℃	70	GB/T1634-2004
Bacol hardness	---	48	GB/T3854-2005
Hardness	---	2H	GB/T6739-1996

4. Instructions (for reference only)

Category		Weight	Notes
RC-TM-196(N)Piano		100
Curing agent	Cyclohexanone peroxide L Methyl ethyl ketone peroxide M	2~4 1~2	It depends on the ambient temperature and humidity if you choose one when preparing
accelerator RCA		1~5	Depends on ambient temperature and humidity
RC-102Wax		1~1.2%	Use the most surface layer
Color Paste		4~10	For coloring

5. Notes
1) When the construction environment temperature is high and the gel time is short, the amount of curing agent should not be reduced,gel retarder RC-406 should be added as needed.
2) When the ambient temperature is lower than 15℃, the RC-TM-196 piano needs to bake the resin at 30-40℃ for more than 10 hours before it can be used.
3) The product should be stored in a cool place below 25℃, avoid fire, and keep away from heat and radiation sources. The shelf life of storage below 25℃ is 3 months after leaving the factory

6. Product Safety Data (SDS):
Before using this product, please read the SDS of this product in detail.

Cooperative Partner